I'm trying to compile a simple hello world application to be run on uCLinux (2.4) which is running on a board with a Freescale Coldfire (MCF5280C) processor...and I'm not quite sure what to do here.
I know I need to compile with the correct version/tools from Freescale to target this hardware, so I downloaded and installed the Coldfire tool chain and verified that one I have is for my target:
mike@linux-4puc:/usr/local/m68k-elf/bin> ./gcc -v
Reading specs from /usr/local/lib/gcc-lib/m68k-elf/2.95.3/specs
gcc version 2.95.3 20010315 (release)(ColdFire patches - 20010318 from http://fiddes.net/coldfire/)(uClinux XIP and shared lib patches from http://www.snapgear.com/)
I tried a simple gcc "file" type command:
mike@linux-4puc:/home/mike> /usr/local/m68k-elf/bin/gcc test.c
/usr/local/m68k-elf/bin/ld.real: cannot open crt0.o: No such file or directory
collect2: ld returned 1 exit status
Which does not work at all.. so it's clearly more complex that than. The output almost looks like it wants me to build the tool chain before I use it?? Anyone ever done this before? Not sure what I need to do or if I just need some flags.
You might also try seeing if you have a command called m68k-elf-gcc or something along those lines. This is a common naming for cross-compilers.
As for your problem, it sounds like there is something wrong with your compiler setup. crt0.o is the object file that contains C-runtime setup code. The linker (what is actually giving the error) should know where this file is if setup properly.
When you installed you should have run make install as the last step without having modified anything since the make step. The configuration step will setup certain variables and such based on the path where it's supposed to be installed.