I'm trying to use pywinusb to send output report to a pic18f4550. The device can receive data, and I've tested it with a C# application, which worked fine. Also, I can read data from the device with pywinusb just fine, but I have a problem trying to send data.
Here's the code I'm running:
from pywinusb import hid
filter = hid.HidDeviceFilter(vendor_id = 0x0777, product_id = 0x0077)
devices = filter.get_devices()
if devices:
device = devices[0]
print "success"
device.open()
out_report = device.find_output_reports()[0]
buffer= [0x00]*65
buffer[0]=0x0
buffer[1]=0x01
buffer[2]=0x00
buffer[3]=0x01
out_report.set_raw_data(buffer)
out_report.send()
dev.close()
It produces this error:
success
Traceback (most recent call last):
File "C:\Users\7User\Desktop\USB PIC18\out.py", line 24, in <module>
out_report.send()
File "build\bdist.win32\egg\pywinusb\hid\core.py", line 1451, in send
self.__prepare_raw_data()
File "build\bdist.win32\egg\pywinusb\hid\core.py", line 1406, in __prepare_raw_data
byref(self.__raw_data), self.__raw_report_size) )
File "build\bdist.win32\egg\pywinusb\hid\winapi.py", line 382, in __init__
raise helpers.HIDError("hidP error: %s" % self.error_message_dict[error_code])
HIDError: hidP error: data index not found
Here is my code and it works with an MSP430F chip running TI's datapipe USB stack. This is basically hid input and output endpoints that act as a custom data pipe allowing me to send 64 bytes in any format I want with the exception of the first byte being an ID number (defined by TI) decimal 63 and the second byte being the number of pertinent or useful bytes in the packet (64 byte max packet) with the first two bytes described above. It took me a while to figure this out mostly because of the lack of documentation. The few examples that come with pywinusb are hard to learn from at best. Anyways here is my code. It is working with my micro so this should help you.
filter = hid.HidDeviceFilter(vendor_id = 0x2048, product_id = 0x0302)
hid_device = filter.get_devices()
device = hid_device[0]
device.open()
print(hid_device)
target_usage = hid.get_full_usage_id(0x00, 0x3f)
device.set_raw_data_handler(sample_handler)
print(target_usage)
report = device.find_output_reports()
print(report)
print(report[0])
buffer = [0xFF]*64
buffer[0] = 63
print(buffer)
report[0].set_raw_data(buffer)
report[0].send()
One area that may be screwing you up is here:
out_report = device.find_output_reports()[0]
Try using "out_report = device.find_output_reports()" without the "[0]" at the end. Then use
out_report[0].set_raw_data(buffer)
and finally
out_report[0].send()
Hope this helps you out.