I'd like to create my own iBeacon with some Bluetooth Low Energy dev kits. Apple has yet to release a specification for iBeacons, however, a few hardware developers have reverse Engineered the iBeacon from the AirLocate Sample code and started selling iBeacon dev kits.
So what is the iBeacon Bluetooth Profile?
Bluetooth Low Energy uses GATT for LE profile service discovery. So I think we need to know the Attribute Handle, Attribute Type, Attribute Value, and maybe the Attribute Permissions of the iBeacon attribute. So for an iBeacon with a UUID of E2C56DB5-DFFB-48D2-B060-D0F5A71096E0, a major value of 1 and a minor value of 1 what would the Bluetooth GATT profile service be?
Here are some assumptions I've made from the discussion on Apple's forums and through the docs.
You only need to see the profile service (GATT) of a Bluetooth peripheral to know it is an iBeacon.
The Major and Minor keys are encoded somewhere in this profile service
Heres some companies with iBeacon Dev Kits that seem to have this figure out already:
Hopefully, in time we will have a profile posted on Bluetooth.org like these: https://www.bluetooth.org/en-us/specification/adopted-specifications
For an iBeacon with ProximityUUID E2C56DB5-DFFB-48D2-B060-D0F5A71096E0, major 0, minor 0, and calibrated Tx Power of -59 RSSI, the transmitted BLE advertisement packet looks like this:
d6 be 89 8e 40 24 05 a2 17 6e 3d 71 02 01 1a 1a ff 4c 00 02 15 e2 c5 6d b5 df fb 48 d2 b0 60 d0 f5 a7 10 96 e0 00 00 00 00 c5 52 ab 8d 38 a5
This packet can be broken down as follows:
d6 be 89 8e # Access address for advertising data (this is always the same fixed value)
40 # Advertising Channel PDU Header byte 0. Contains: (type = 0), (tx add = 1), (rx add = 0)
24 # Advertising Channel PDU Header byte 1. Contains: (length = total bytes of the advertising payload + 6 bytes for the BLE mac address.)
05 a2 17 6e 3d 71 # Bluetooth Mac address (note this is a spoofed address)
02 01 1a 1a ff 4c 00 02 15 e2 c5 6d b5 df fb 48 d2 b0 60 d0 f5 a7 10 96 e0 00 00 00 00 c5 # Bluetooth advertisement
52 ab 8d 38 a5 # checksum
The key part of that packet is the Bluetooth Advertisement, which can be broken down like this:
02 # Number of bytes that follow in first AD structure
01 # Flags AD type
1A # Flags value 0x1A = 000011010
bit 0 (OFF) LE Limited Discoverable Mode
bit 1 (ON) LE General Discoverable Mode
bit 2 (OFF) BR/EDR Not Supported
bit 3 (ON) Simultaneous LE and BR/EDR to Same Device Capable (controller)
bit 4 (ON) Simultaneous LE and BR/EDR to Same Device Capable (Host)
1A # Number of bytes that follow in second (and last) AD structure
FF # Manufacturer specific data AD type
4C 00 # Company identifier code (0x004C == Apple)
02 # Byte 0 of iBeacon advertisement indicator
15 # Byte 1 of iBeacon advertisement indicator
e2 c5 6d b5 df fb 48 d2 b0 60 d0 f5 a7 10 96 e0 # iBeacon proximity uuid
00 00 # major
00 00 # minor
c5 # The 2's complement of the calibrated Tx Power
Any Bluetooth LE device that can be configured to send a specific advertisement can generate the above packet. I have configured a Linux computer using Bluez to send this advertisement, and iOS7 devices running Apple's AirLocate test code pick it up as an iBeacon with the fields specified above. See: Use BlueZ Stack As A Peripheral (Advertiser)
This blog has full details about the reverse engineering process.