network-programmingopenflow

connecting a host to the internet through an OpenFlow software switch


I have two Ubuntu virtual machines X and Y. x has Open vSwitch and floodlight running on it and the Y vm acts as a host. I have a Host-Only adapter and a NAT adapter attached to X vm. and the Y vm has only a Host-Only adapter.

the host only adapters of X and Y vm's are in the same subnet.

now I want to connect the Y vm to the internet through the OVS running on X vm. is it possible? if yes, how?


Solution

  • To get internet connectivity to the host machines only through the Open vSwitch,

    USING DHCP

    1: add the interface connected to internet(say eth0) on the OVS machine to the OVS bridge.
    2: change the ip address of eth0 interface to 0 and get a dhcp ip to the bridge interface using dhclient
    3: add the interfaces that are connected to the hosts to the OVS bridge
    4: get dhcp ip's to the hosts by using dhclient on the host machines
    

    USING custom IP addresses

    1: add the interfaces connected to the hosts and the interface connected to the internet to the OVS bridge
    2: make the internet interface ip as 0 
    3: set the bridge ip address to the ip address that was previously assigned to the internet interface
    4: make sure you have the host ip addresses in the same network address range as the bridge IP address.