I compiled the gstreamer with gst-omx following this tutorial: http://www.onepitwopi.com/raspberry-pi/gstreamer-1-2-on-the-raspberry-pi/
Everything went fine and in the end when i ran gst-inspect-1.0 | grep omx I got:
omx: omxmpeg2videodec: OpenMAX MPEG2 Video Decoder
omx: omxmpeg4videodec: OpenMAX MPEG4 Video Decoder
omx: omxh263dec: OpenMAX H.263 Video Decoder
omx: omxh264dec: OpenMAX H.264 Video Decoder
omx: omxtheoradec: OpenMAX Theora Video Decoder
omx: omxvp8dec: OpenMAX VP8 Video Decoder
omx: omxmjpegdec: OpenMAX MJPEG Video Decoder
omx: omxvc1dec: OpenMAX WMV Video Decoder
omx: omxh264enc: OpenMAX H.264 Video Encoder
omx: omxanalogaudiosink: OpenMAX Analog Audio Sink
omx: omxhdmiaudiosink: OpenMAX HDMI Audio Sink
Everything seems fine but when I try to use gst-launch-1.0 with the omx decoder I get nothing.
This pipeline runs fine(but really slow so I closed it in the middle):
pi@raspberrypi ~ $ gst-launch-1.0 filesrc location=./h264_720p_hp_5.1_6mbps_ac3_planet.mp4 ! qtdemux ! h264parse ! avdec_h264 ! eglglessink
Setting pipeline to PAUSED ...
Pipeline is PREROLLING ...
Got context from element 'eglglessink0': gst.egl.EGLDisplay=context, display=(Gst EGLDisplay)NULL;
Redistribute latency...
Pipeline is PREROLLED ...
Setting pipeline to PLAYING ...
New clock: GstSystemClock
WARNING: from element /GstPipeline:pipeline0/GstEglGlesSink:eglglessink0: A lot of buffers are being dropped.
Additional debug info:
gstbasesink.c(2791): gst_base_sink_is_too_late (): /GstPipeline:pipeline0/GstEglGlesSink:eglglessink0:
There may be a timestamping problem, or this computer is too slow.
^Chandling interrupt.
Interrupt: Stopping pipeline ...
Execution ended after 0:00:07.915424268
Setting pipeline to PAUSED ...
Setting pipeline to READY ...
Setting pipeline to NULL ...
Freeing pipeline ...
Then I try the same pipeline with omx I get this:
pi@raspberrypi ~ $ gst-launch-1.0 -v filesrc location=h264_720p_hp_5.1_6mbps_ac3_planet.mp4 ! qtdemux ! h264parse ! omxh264dec ! eglglessink
Setting pipeline to PAUSED ...
Pipeline is PREROLLING ...
Got context from element 'eglglessink0': gst.egl.EGLDisplay=context, display=(GstEGLDisplay)NULL;
/GstPipeline:pipeline0/GstH264Parse:h264parse0.GstPad:sink: caps = video/x-h264, stream-format=(string)avc, alignment=(string)au, level=(string)5.1, profile=(string)high, codec_data=(buffer)01640033ffe1001867640033ac34e2805005ba10001974f004c4b408f18318a801008468eebce5531cc305d2628d13080214868783a1c0d04e12142c0ac0da02fe10042ad35e9e850b748c778a1410088b172105449ca3050e204448b20a4d8a081827090809848541dc4290a43164215a201900cae8340f81e86f03300b6017002ac05981d61a07802a8400a902087404700bc010506e036404b811805902e07203e0087ff85b, width=(int)1280, height=(int)720, framerate=(fraction)24000/1001, pixel-aspect-ratio=(fraction)1/1
/GstPipeline:pipeline0/GstH264Parse:h264parse0.GstPad:src: caps = video/x-h264, stream-format=(string)byte-stream, alignment=(string)au, level=(string)5.1, profile=(string)high, width=(int)1280, height=(int)720, framerate=(fraction)24000/1001, pixel-aspect-ratio=(fraction)1/1, parsed=(boolean)true
/GstPipeline:pipeline0/GstOMXH264Dec-omxh264dec:omxh264dec-omxh264dec0.GstPad:sink: caps = video/x-h264, stream-format=(string)byte-stream, alignment=(string)au, level=(string)5.1, profile=(string)high, width=(int)1280, height=(int)720, framerate=(fraction)24000/1001, pixel-aspect-ratio=(fraction)1/1, parsed=(boolean)true
/GstPipeline:pipeline0/GstOMXH264Dec-omxh264dec:omxh264dec-omxh264dec0.GstPad:src: caps = video/x-raw, format=(string)I420, width=(int)1280, height=(int)720, pixel-aspect-ratio=(fraction)1/1, interlace-mode=(string)progressive, colorimetry=(string)bt709, framerate=(fraction)24000/1001
/GstPipeline:pipeline0/GstEglGlesSink:eglglessink0.GstPad:sink: caps = video/x-raw, format=(string)I420, width=(int)1280, height=(int)720, pixel-aspect-ratio=(fraction)1/1, interlace-mode=(string)progressive, colorimetry=(string)bt709, framerate=(fraction)24000/1001
ERROR: from element /GstPipeline:pipeline0/GstOMXH264Dec-omxh264dec:omxh264dec-omxh264dec0: Could not configure supporting library.
Additional debug info:
gstomxvideodec.c(1505): gst_omx_video_dec_loop (): /GstPipeline:pipeline0/GstOMXH264Dec-omxh264dec:omxh264dec-omxh264dec0:
Unable to reconfigure output port
ERROR: pipeline doesn't want to preroll.
Setting pipeline to NULL ...
/GstPipeline:pipeline0/GstEglGlesSink:eglglessink0.GstPad:sink: caps = NULL
/GstPipeline:pipeline0/GstOMXH264Dec-omxh264dec:omxh264dec-omxh264dec0.GstPad:src: caps = NULL
/GstPipeline:pipeline0/GstOMXH264Dec-omxh264dec:omxh264dec-omxh264dec0.GstPad:sink: caps = NULL
/GstPipeline:pipeline0/GstH264Parse:h264parse0.GstPad:src: caps = NULL
/GstPipeline:pipeline0/GstH264Parse:h264parse0.GstPad:sink: caps = NULL
/GstPipeline:pipeline0/GstQTDemux:qtdemux0.GstPad:video_0: caps = NULL
/GstPipeline:pipeline0/GstQTDemux:qtdemux0.GstPad:audio_0: caps = NULL
Freeing pipeline ...
I think this is the most important part of this error:
ERROR: from element /GstPipeline:pipeline0/GstOMXH264Dec-omxh264dec:omxh264dec-omxh264dec0: Could not configure supporting library.
but couldn't find any reference to this error...
Tried to make check the gst-omx but it doesn't have any check routine.
Can anyone shed some light in this matter?
Thanks a lot! =D
UPDATE:
Strangely, if I started my rpi without the hdmi cable and executed my pipeline via ssh it worked(but I didn't see any image because the hdmi cable was off)
pi@raspberrypi ~ $ gst-launch-1.0 -v filesrc location=h264_720p_hp_5.1_6mbps_ac3_planet.mp4 ! qtdemux ! h264parse ! omxh264dec ! eglglessink
Setting pipeline to PAUSED ...
Pipeline is PREROLLING ...
Got context from element 'eglglessink0': gst.egl.EGLDisplay=context, display=(GstEGLDisplay)NULL;
/GstPipeline:pipeline0/GstH264Parse:h264parse0.GstPad:sink: caps = video/x-h264, stream-format=(string)avc, alignment=(string)au, level=(string)5.1, profile=(string)high, codec_data=(buffer)01640033ffe1001867640033ac34e2805005ba10001974f004c4b408f18318a801008468eebce5531cc305d2628d13080214868783a1c0d04e12142c0ac0da02fe10042ad35e9e850b748c778a1410088b172105449ca3050e204448b20a4d8a081827090809848541dc4290a43164215a201900cae8340f81e86f03300b6017002ac05981d61a07802a8400a902087404700bc010506e036404b811805902e07203e0087ff85b, width=(int)1280, height=(int)720, framerate=(fraction)24000/1001, pixel-aspect-ratio=(fraction)1/1
/GstPipeline:pipeline0/GstH264Parse:h264parse0.GstPad:src: caps = video/x-h264, stream-format=(string)byte-stream, alignment=(string)au, level=(string)5.1, profile=(string)high, width=(int)1280, height=(int)720, framerate=(fraction)24000/1001, pixel-aspect-ratio=(fraction)1/1, parsed=(boolean)true
/GstPipeline:pipeline0/GstOMXH264Dec-omxh264dec:omxh264dec-omxh264dec0.GstPad:sink: caps = video/x-h264, stream-format=(string)byte-stream, alignment=(string)au, level=(string)5.1, profile=(string)high, width=(int)1280, height=(int)720, framerate=(fraction)24000/1001, pixel-aspect-ratio=(fraction)1/1, parsed=(boolean)true
/GstPipeline:pipeline0/GstOMXH264Dec-omxh264dec:omxh264dec-omxh264dec0.GstPad:src: caps = video/x-raw, format=(string)I420, width=(int)1280, height=(int)720, pixel-aspect-ratio=(fraction)1/1, interlace-mode=(string)progressive, colorimetry=(string)bt709, framerate=(fraction)24000/1001
/GstPipeline:pipeline0/GstEglGlesSink:eglglessink0.GstPad:sink: caps = video/x-raw, format=(string)I420, width=(int)1280, height=(int)720, pixel-aspect-ratio=(fraction)1/1, interlace-mode=(string)progressive, colorimetry=(string)bt709, framerate=(fraction)24000/1001
Pipeline is PREROLLED ...
Setting pipeline to PLAYING ...
New clock: GstSystemClock
Got EOS from element "pipeline0".
Execution ended after 0:01:52.821428472
Setting pipeline to PAUSED ...
Setting pipeline to READY ...
Setting pipeline to NULL ...
Freeing pipeline ...
Does this mean that the problem is in the eglglessink?
Just found the solution:
I forgot to increase the memory of the gpu, so my 720p video decoding didn't have enough memory to run. The easy fix is just to add
gpu_mem=128
to /boot/config.txt and reboot the raspberry. It was, after all, related to eglglessink ;D