cfilesystemsext4superblock

Filesystem- ext4 : Application corrupting superblock

I found many links but almost all are pointing to fix not the reason.

I created a 7GB ext4 partition on a sd card connected via USB card reader to PC. I have an application which is writing 10488576 bytes to the mentioned partition (/dev/sdc2). After the application run the filesystem is looking corrupt:

#fsck.ext4 -v /dev/sdc2
e2fsck 1.42.8 (20-Jun-2013)
ext2fs_open2: Bad magic number in super-block
fsck.ext4: Superblock invalid, trying backup blocks...
Superblock has an invalid journal (inode 8).
Clear<y>? no
fsck.ext4: Illegal inode number while checking ext3 journal for /dev/sdc2

/dev/sdc2: ***** FILE SYSTEM WAS MODIFIED *****

/dev/sdc2: ********** WARNING: Filesystem still has errors **********



#dumpe2fs /dev/sdc2
dumpe2fs 1.42.8 (20-Jun-2013)
dumpe2fs: Bad magic number in super-block while trying to open /dev/sdc2
Couldn't find valid filesystem superblock.

The application is simply using something like below (i can't post exact code):

    char *write_buf; //declared in header
    write_buf = (char *) malloc(size) // where size = 10488576. This allocation is happening in function a() called from main
    char *buf; // declared locally in function b()
    buf = write_buf; // in function b()
    write(fd,buf,size); // in function b()

The filesystem block size is 4K. Backup superblock at 32768 , 98304 ,163840 ,229376 , 294912 ,819200, 884736 ,1605632 Let me know if any more information required. I need to understand what might cause this corruption , because I'm very much affirmative that something may be wrong with application code.

EDIT: I can see that primary superblock starts at 0 , and the lseek() call before write() is also doing SEEK_SET to 0, which would overwrite superblock information. I am going to try lseek far from superblock before write().

EDIT: I have got this fixed by doing as I mentioned above. As per dumpe2fs o/p I had below for group 0:

Group 0: (Blocks 0-32767)
  Checksum 0x8bba, unused inodes 8069
  Primary superblock at 0, Group descriptors at 1-1
  Reserved GDT blocks at 2-474
  Block bitmap at 475 (+475), Inode bitmap at 491 (+491)
  Inode table at 507-1011 (+507)
  24175 free blocks, 8069 free inodes, 2 directories, 8069 unused inodes
  Free blocks: 8593-32767
  Free inodes: 12-8080

So before writing I did lseek to 8593*4096 .Now filesystem is not getting corrupt.

Solution

  • I have got this fixed by doing as I mentioned above. As per dumpe2fs o/p I had below for group 0:

    Group 0: (Blocks 0-32767)
  Checksum 0x8bba, unused inodes 8069
  Primary superblock at 0, Group descriptors at 1-1
  Reserved GDT blocks at 2-474
  Block bitmap at 475 (+475), Inode bitmap at 491 (+491)
  Inode table at 507-1011 (+507)
  24175 free blocks, 8069 free inodes, 2 directories, 8069 unused inodes
  Free blocks: 8593-32767
  Free inodes: 12-8080

    So before writing I did lseek to 8593*4096.Now filesystem is not getting corrupt.