after installation without any trouble I've started aerospike on a openvz vps with 2cores and 4gb ram. this is the result:
root@outland:~# /etc/init.d/aerospike start
* Start aerospike: asd [OK]
then check for running asd:
root@outland:~# /etc/init.d/aerospike status
* Halt aerospike: asd [fail]
what is going wrong?
adding logs:
Mar 03 2015 15:17:57 GMT: INFO (config): (cfg.c::3033) system file descriptor limit: 100000, proto-fd-max: 15000
Mar 03 2015 15:17:57 GMT: WARNING (cf:misc): (id.c::249) Tried eth,bond,wlan and list of all available interfaces on device.Failed to retrieve physical address with errno 19 No such device
Mar 03 2015 15:17:57 GMT: CRITICAL (config): (cfg.c:3363) could not get unique id and/or ip address
Mar 03 2015 15:17:57 GMT: WARNING (as): (signal.c::120) SIGINT received, shutting down
Mar 03 2015 15:17:57 GMT: WARNING (as): (signal.c::123) startup was not complete, exiting immediately
This is your config problem
Mar 03 2015 15:17:57 GMT: WARNING (cf:misc): (id.c::249) Tried eth,bond,wlan and list of all available interfaces on device.Failed to retrieve physical address with errno 19 No such device
Mar 03 2015 15:17:57 GMT: CRITICAL (config): (cfg.c:3363) could not get unique id and/or ip address
Basically the vps has a non standard interface name.
The solution is to add your interface name as network-interface-name to the config.
http://www.aerospike.com/docs/operations/troubleshoot/startup/#problem-with-network-interface
Which OS are your using btw?