Arduino does the following successfully. But when I try it from the command line it fails. Why is that?
C:\Users\???\AppData\Local\Arduino15\packages\sandeepmistry\tools\openocd\0.10.0-dev.nrf5/bin/openocd.exe -d2
-f interface/jlink.cfg
-c transport select swd;
-f target/nrf52.cfg
-c program {{C:\???\EddystoneURL.ino.hex}} verify reset; shutdown;
Result:
Open On-Chip Debugger 0.10.0-dev-00254-g696fc0a (2016-04-10-10:13)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
debug_level: 2
swd
adapter speed: 10000 kHz
cortex_m reset_config sysresetreq
jaylink: Failed to open device: LIBUSB_ERROR_NOT_SUPPORTED.
Info : No device selected, using first device.
Info : J-Link OB-SAM3U128-V2-NordicSemi compiled Jan 21 2016 17:58:20
Info : Hardware version: 1.00
Info : VTarget = 3.300 V
Info : Reduced speed from 10000 kHz to 1000 kHz (maximum).
Info : Reduced speed from 10000 kHz to 1000 kHz (maximum).
Info : clock speed 10000 kHz
Info : SWD IDCODE 0x2ba01477
Info : nrf52.cpu: hardware has 6 breakpoints, 4 watchpoints
nrf52.cpu: target state: halted
target halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x000008e4 msp: 0x20000400
** Programming Started **
auto erase enabled
Info : nRF51822-QFN48(build code: B00) 512kB Flash
Warn : using fast async flash loader. This is currently supported
Warn : only with ST-Link and CMSIS-DAP. If you have issues, add
Warn : "set WORKAREASIZE 0" before sourcing nrf51.cfg to disable it
wrote 28672 bytes from file C:\???\EddystoneURL.ino.hex in 0.835260s (33.522 KiB/s)
** Programming Finished **
** Verify Started **
verified 26768 bytes in 0.144835s (180.486 KiB/s)
** Verified OK **
** Resetting Target **
shutdown command invoked
When I try the above from the command line I get the following:
C:\WINDOWS\system32>C:\Users\???\AppData\Local\Arduino15\packages\sandeepmistry\tools\openocd\0.10.0-dev.nrf5/bin/openocd.exe -d2 -f interface/jlink.cfg -c transport select swd; -f target/nrf52.cfg -c program {{C:\???\EddystoneURL.ino.hex}} verify reset; shutdown;
Open On-Chip Debugger 0.10.0-dev-00254-g696fc0a (2016-04-10-10:13)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
debug_level: 2
interface_transports transport ...
transport
transport init
transport list
transport select [transport_name]
transport : command requires more arguments
in procedure 'transport'
I have replaced the full path's to the hex files to make it easier to read.
I am trying to use Arduino as my tool-chain to upload a pre-built binaries with it. From the IDE I can do it but only with the Arduino Built code.
What am I missing?
I figured it out!!!
The command parameters need to be in quotes or Windows will think they are the next parameter because of spaces in them.
I get the feeling folder/file names with spaces will have the same issue.
C:\Users\???\AppData\Local\Arduino15\packages\sandeepmistry\tools\openocd\0.10.0-dev.nrf5/bin/openocd.exe -d2
-f interface/jlink.cfg
-c "transport select swd;"
-f target/nrf52.cfg
-c "program {{C:\???\EddystoneURL.ino.hex}} verify reset; shutdown;"