STM32 Output MCO configuration

I try to configure my MCO ouput on my STM32f103, only with STD periph lib.

here is my code:

    void OutputMCO() {
GPIO_InitTypeDef GPIO_InitStructure;

RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);

/* Output clock on MCO pin ---------------------------------------------*/

GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOA, &GPIO_InitStructure);

// pick one of the clocks to spew
//RCC_MCOConfig(RCC_MCOSource_SYSCLK); // Put on MCO pin the: System clock selected
//RCC_MCOConfig(RCC_MCOSource_HSE); // Put on MCO pin the: freq. of external crystal
//RCC_MCOConfig(RCC_MCOSource_PLLCLK_Div2); // Put on MCO pin the: System clock selected
}

I have an issue here:

// pick one of the clocks to spew
//RCC_MCOConfig(RCC_MCOSource_SYSCLK); // Put on MCO pin the: System clock selected
//RCC_MCOConfig(RCC_MCOSource_HSE); // Put on MCO pin the: freq. of external crystal
//RCC_MCOConfig(RCC_MCOSource_PLLCLK_Div2); // Put on MCO pin the: System clock selected

None of the 3 possibilities are working on my code. This code was found on internet. Do you know where should I find correct parameters ? The definition of RCC_MCOSource doesn't really help me Thank you

I found the solution in file stm32f10x_rcc:

#define RCC_MCO_NoClock                  ((uint8_t)0x00)
#define RCC_MCO_SYSCLK                   ((uint8_t)0x04)
#define RCC_MCO_HSI                      ((uint8_t)0x05)
#define RCC_MCO_HSE                      ((uint8_t)0x06)
#define RCC_MCO_PLLCLK_Div2