plt.plot() cause blue screen on windows

This code cause a blue screen on windows on my computer :

import matplotlib.pyplot as plt

plt.plot(range(10),range(10)) # This is the line that cause the crash

WhoCrashed tells me this :

This was probably caused by the following module: nt_wrong_symbols.sys (nt_wrong_symbols) Bugcheck code: 0x124 (0x0, 0xFFFFB60A6AF4D028, 0xB2000000, 0x70005) Error: WHEA_UNCORRECTABLE_ERROR

Here is a link to the full Minidump

What I have done:

• Fully tested the CPU with a CPU-Z stress test
• Fully tested the RAM with memtest86+
• Tested the GPU with Assassin's creed origin in full ultra
• Tested the same code on Ubuntu (double boot) : works fine

This lead me to believe this is a windows specific error.

Hardware configuration :

• i9-7940X
• GTX 1080 Ti
• 64 Gb RAM @2400Mhz (CPU frequency)

Software :

• Windows 10, fresh install (I've always had this issue)
• Python 2.7 installed through Anaconda ( I tested the code with Jupyter and IPython with the same results)
• Windows and graphic drivers up to date

This is the only thing that causes blue screen on my computer, and I'm out of ideas on how to solve this, any advice would be greatly appreciated.

NOTE : I asked this question here as it appears to be matplotlib related, I hope this is the right place

EDIT : Correction : it does not happens all the time, but more like 95% of the time.

I updated the BIOS and it seems to work now. As i9-7940X is very recent (Q3'17), my old BIOS version was supposed to work with it but was released before the CPU (06/17) so that might have been the issue.

I'll post again if blue screens come back.