[SOLVED] HDMI port and VGA port not recognized on Fedora 27

HDMI port and VGA port not recognized on Fedora 27

My new laptop has an NVIDIA graphics card (not sure which one). I have freshly installed Fedora 27. However, I cannot get my HDMI or VGA port to work or even be recognized. I've tried following the instructions at https://www.if-not-true-then-false.com/2015/fedora-nvidia-guide/ and https://fedoraproject.org/wiki/Bumblebee (as well as a few others), but have been unsuccessful thus so far.

Here is some output from various commands for context:

> xrandr -q
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 1920 x 1080, current 1920 x 1080, maximum 1920 x 1080
default connected primary 1920x1080+0+0 0mm x 0mm
   1920x1080     77.00* 

> sudo lspci -v | grep -A 15 'VGA'
00:02.0 VGA compatible controller: Intel Corporation Device 591b (rev 04) (prog-if 00 [VGA controller])
    Subsystem: Dell Device 07d1
    Flags: bus master, fast devsel, latency 0, IRQ 255
    Memory at eb000000 (64-bit, non-prefetchable) [size=16M]
    Memory at 80000000 (64-bit, prefetchable) [size=256M]
    I/O ports at f000 [size=64]
    [virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
    Capabilities: [40] Vendor Specific Information: Len=0c <?>
    Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
    Capabilities: [ac] MSI: Enable- Count=1/1 Maskable- 64bit-
    Capabilities: [d0] Power Management version 2
    Capabilities: [100] Process Address Space ID (PASID)
    Capabilities: [200] Address Translation Service (ATS)
    Capabilities: [300] Page Request Interface (PRI)
    Kernel modules: i915

> sudo lspci -v | grep -A 18 '3D'
01:00.0 3D controller: NVIDIA Corporation Device 179c (rev a2)
    Subsystem: Dell Device 07d1
    Flags: bus master, fast devsel, latency 0, IRQ 255
    Memory at ec000000 (32-bit, non-prefetchable) [size=16M]
    Memory at c0000000 (64-bit, prefetchable) [size=256M]
    Memory at d0000000 (64-bit, prefetchable) [size=32M]
    I/O ports at e000 [disabled] [size=128]
    Expansion ROM at ed000000 [disabled] [size=512K]
    Capabilities: [60] Power Management version 3
    Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
    Capabilities: [78] Express Endpoint, MSI 00
    Capabilities: [100] Virtual Channel
    Capabilities: [250] Latency Tolerance Reporting
    Capabilities: [258] L1 PM Substates
    Capabilities: [128] Power Budgeting <?>
    Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
    Capabilities: [900] #19
    Kernel modules: nouveau

Any ideas?

Solution