c++visual-studio-2015compiler-errorsprecompiled-headersmixed-mode

C3859: Virtual memory range for PCH exceeded


I get this error message from time to time (not every time) I compile (EDIT: sorry, I didn't make myself clear here: I actually meant "rebuild") my mixed-mode project. And Visual Studio tells me to "recompile with a command line option of '-Zm114' or greater". In principle no problem, I just do as VS tells me.

But currently, there are two problems with this:

  1. Why does it not occur every time I do a rebuild? If I understand correctly, the compiler ran out of memory while compiling my project. So if I do a rebuild, which cleans all prior work, shouldn't it run out of memory the next time too, if I don't change anything?

  2. To be on the safe side, I already have specified a value of 120 for Zm (ie Zm120) in all configurations of this project. Why do I get an error message with this lower value? Or is the suggested value of 114 just a wild guess of VS?


Solution

  • I know this is old but I ended up here so I might as well answer.

    There is a great article about PCH problems here.

    1) Why does it not occur every time I do a rebuild?
    This is a bit complex to answer surely. Since it is not happening every time, it could be several issues. It is most likely due to memory allocation. From the article :

    • Fragmentation of the virtual memory address range(s) required by the PCH before CL.EXE is able to load it into memory.
    • Failure of the Windows OS under heavy loads to increase the pagefile size within a certain time threshold.

    It could also be a Pagefile size problem (most likely on Virtual machines) but I believe you would have a message similar to this :

    c1xx : error C3859: Failed to create virtual memory for PCH [...Project.vcxproj] c1xx: note: the system returned code 1455: The paging file is too small for this operation to complete

    2) Why do I get an error message with this lower value? (Zm114 instead of Zm120)
    Make sure that the Zm120 modifications handle all the build configurations (Release|Debug) and Platform (x86|x64).

    It could also help to set PreferredToolArchtecture to x64:

    If you’re using MSBuild from the command line you can pass /p:PreferredToolArchtecture=x64 to MSBuild. If you’re building with MSBuild from within Visual Studio, you can edit your .vcxproj file to include a PropertyGroup containing this property.

    This one is easily overlook, but those kind of problem also happen when the precompiled header is just too big. Doing a little cleanup might be a good idea as well.