debianwindows-10driverbeagleboneblackbeagleboard

Cannot install the driver of BeagleBone on the Windows 10

When I try to install the drivers of my BeagleBone on the Windows 10, I get : enter image description here

Knowing that I have the latest Image of Beaglebone which : enter image description here

How can I fix that?

Solution

  • A current / latest image does not need any additional drivers installed.

    You should have:

    The device exposes a second network port that is not used by Windows. Other operating systems prefer that port over the one used by Windows.

    Note: If you don't see those devices, then your Beaglebone has not booted into the image. Usually that's pretty obvious by looking at the LEDs. There should be one solid, and two blinking. If you have problems, write the image to the card again and also make sure to hold down S2 while powering on the device!