I've tried various Tello SDK/wrapper libraries to control a Tello drone programmatically, but with no success. Currently I am focused on using the simpler C# wrapper:
I am getting a very straight-forward error, but it seems invalid:
A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond
I can confirm that the drone works just fine via the Tello App (for iOS).
Here are some technical details...
I am connecting programmatically to IP Address: 192.168.10.1 with Port: 8889.
Anybody with experience with any of these libraries/scripts have any ideas?
My problem is now resolved.
No thanks to the manual, it was not very clear about setting up the network when accessing the drone via the SDK.
Here is the solution below...
Before running the program from your computer, do the following:
- Turn on the Tello drone and wait for it to be initialized.
- Connect your computer (PC/Mac) to the Tello drone WIFI (the SSID should have "Tello" in it).
- Run your program and try sending commands (it should work!).
My problem is now resolved. I updated my original post to include details for how i resolved it.