androidmakefilecmakeandroid-ndkwireguard

How do I get Wireguard-Android make file to function on Windows?

I'm trying to build the wireguard-android sources on my windows machine, fixing the problems step by step with trial and error.

I have CMake and Make installed, the first problem I encountered was the 'bad' value reported by uname (mingw64), not matching with the golang filenames hosted by Google.

I've edited (hacked) the make file to point to the real filename of the windows version (amd64). The problem is the windows version has a .zip extension instead of .tar.gzand the result from zip doesn't seem compatible with the piped command.

Original command:

curl "https://dl.google.com/go/go$(DESIRED_GO_VERSION).$(shell uname -s | tr '[:upper:]' '[:lower:]')-$(NDK_GO_ARCH_MAP_$(shell uname -m)).tar.gz" | tar -C "$(dir $@)" --strip-components=1 -xzf -

My attempted changes: (uses an if-else because it still needs to run on mac too)

ifeq "msys" "$(shell uname -o | tr '[:upper:]' '[:lower:]')"
    # Note: when enclosed in the ifeq, the ARCH_MAP part no longer worked
    # Note: using tar with the zip fails, because we cant untar a zip (signal 13)
    # Note: using unzip with the zip fails with confusing paths
    curl "https://dl.google.com/go/go$(DESIRED_GO_VERSION).windows-amd64.zip" | unzip -C "$(dir $@)" --strip-components=1 -xzf -
else
    curl "https://dl.google.com/go/go$(DESIRED_GO_VERSION).$(shell uname -s | tr '[:upper:]' '[:lower:]')-$(NDK_GO_ARCH_MAP_$(shell uname -m)).tar.gz" | tar -C "$(dir $@)" --strip-components=1 -xzf -
endif

Resulting error if using unzip:

unzip: cannot find or open C:\wireguard-android\app\build\intermediates\cmake\debug\obj\armeabi-v7a/../generated-src/go-1.13.7/, C:\wireguard-android\app\build\intermediates\cmake\debug\obj\armeabi-v7a/../generated-src/go-1.13.7/.zip or C:\wireguard-android\app\build\intermediates\cmake\debug\obj\armeabi-v7a/../generated-src/go-1.13.7/.ZIP.

% Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed

0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 0 127M 0 5419 0 0 26694 0 1:23:47 --:--:-- 1:23:47 26694

curl: (23) Failed writing body (34 != 1357)

make: *** [C:\wireguard-android\app\build\intermediates\cmake\debug\obj\armeabi-v7a/../generated-src/go-1.13.7/.prepared] Error 9

Resulting error if using tar:

curl "https://dl.google.com/go/go1.13.7.windows-amd64.zip" | tar -C "C:\wireguard-android\app\build\intermediates\cmake\debug\obj\armeabi-v7a/../generated-src/go-1.13.7/" --strip-components=1 -xzf -

% Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed

0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0gzip: stdin has more than one entry--rest ignored tar: Child died with signal 13 tar: Error is not recoverable: exiting now

0 127M 0 108k 0 0 248k 0 0:08:47 --:--:-- 0:08:47 248k

curl: (23) Failed writing body (738 != 1357)

make: *** [C:\wireguard-android\app\build\intermediates\cmake\debug\obj\armeabi-v7a/../generated-src/go-1.13.7/.prepared] Error 2

Solution

  • I've managed to solve this, I'm answering my own question rather than deleting because I think this will eventually help another developer.

    First some clarifications:

    The changed end of the Makefile: (from after the .prepared/mkdir statements)

    # Warning the (lack-of) indentation here is critical https://stackoverflow.com/a/4483467/984830
# Note: I've hardcoded the windows filename below, so you'll need to do an `if` (like in my question) if you want to support other platforms as well

    curl -o "$(BUILDDIR)/go-$(DESIRED_GO_VERSION)/gofile.zip" "https://dl.google.com/go/go$(DESIRED_GO_VERSION).windows-amd64.zip"
    unzip -o "$(BUILDDIR)/go-$(DESIRED_GO_VERSION)/gofile.zip" -d "$(dir $@)"
    rm -f "$(BUILDDIR)/go-$(DESIRED_GO_VERSION)/gofile.zip"

    patch -p1 -f -N -r- -d "$(dir $@)go/" < goruntime-boottime-over-monotonic.diff
    touch "$@"

$(DESTDIR)/libwg-go.so: export PATH := $(BUILDDIR)/go-$(DESIRED_GO_VERSION)/go/bin/:$(PATH)
$(DESTDIR)/libwg-go.so: $(BUILDDIR)/go-$(DESIRED_GO_VERSION)/.prepared go.mod
    go build -tags linux -ldflags="-X golang.zx2c4.com/wireguard/ipc.socketDirectory=/data/data/$(ANDROID_PACKAGE_NAME)/cache/wireguard" -v -trimpath -o "$@" -buildmode c-shared

    The changed end of the CMakeLists file: (replacing the add_custom_target section)

    # added a new variable to get the parent dir without using .. in the path
get_filename_component(destdirparent "${CMAKE_LIBRARY_OUTPUT_DIRECTORY}/.." ABSOLUTE)

# referred to the variable on the last line of this statment
add_custom_target(libwg-go.so WORKING_DIRECTORY "${CMAKE_CURRENT_SOURCE_DIR}/libwg-go" COMMENT "Building wireguard-go" VERBATIM COMMAND make
    ANDROID_ARCH_NAME=${ANDROID_ARCH_NAME}
    ANDROID_C_COMPILER=${ANDROID_C_COMPILER}
    ANDROID_TOOLCHAIN_ROOT=${ANDROID_TOOLCHAIN_ROOT}
    ANDROID_LLVM_TRIPLE=${ANDROID_LLVM_TRIPLE}
    ANDROID_SYSROOT=${ANDROID_SYSROOT}
    ANDROID_PACKAGE_NAME=${ANDROID_PACKAGE_NAME}
    CFLAGS=${CMAKE_C_FLAGS}\ -Wno-unused-command-line-argument
    LDFLAGS=${CMAKE_SHARED_LINKER_FLAGS}\ -fuse-ld=gold
    DESTDIR=${CMAKE_LIBRARY_OUTPUT_DIRECTORY}
    BUILDDIR=${destdirparent}/generated-src
    )

    For reference the original files are here: Makefile & CMakeLists and are mirrored on Github