How to tell if there is fault in the truth table?
In my digital design and computer architecture class.Our teacher gave a truth table for which we had to construct a K-map and minimize it to find the boolean expression
But some of the students quickly identified that there were mistakes in the truth table and started pointing out the mistake.How did they do that?Is there a way to identify mistakes in a truth table?What am I missing?
With this truth table, there are four inputs.
That would mean you would have every combination of settings across inputs (a, b, c, and d). However, this table has two entries for (0, 0, 0, 0) and no entry for (0, 0, 0, 1)
Since the table doesn't cover all the inputs, there is an error in the table because it does not detail what Y should be for (0, 0, 0, 1) In addition, there are two answers for (0, 0, 0, 0), answer (0) and answer (1). Since any logical mapping of inputs can only lead to one output, this table has a second different kind of error.
- Does INVLPG instruction or mprotect() affect the CPU cache state while invalidating TLB entries?
- AVX2 / gcc: Improve CPU-level parallelism by using different registers
- How much of ‘What Every Programmer Should Know About Memory’ is still valid?
- What does memory_order_consume really do?
- How does a pipelined processor guarantee instruction atomicity so they don't conflict, and so interrupts happen at instruction boundaries?
- Handling Precise Exceptions in Tomasulo
- How do machines interpret binary?
- Why is a CPU branch instruction slow?
- Why is processing a sorted array faster than processing an unsorted array?
- Why is Skylake so much better than Broadwell-E for single-threaded memory throughput?
- How to detect E-cores and P-cores in Linux alder lake system?
- What is non-idempotent memory-mapped I/O meaning?
- Does x86 prefetch outside of code segment?
- Negative value forced zero when assigned to uint16_t variable in C
- If I wanted to develop algorithms for a purely RISC machine, what should my development environment be?
- How CPU architecture 8085 and 8086 (and also cpu based on 8086) differ and categorized?
- What causes kernel memory operations in perf stats for an userspace-only process?
- change instruction set in GCC
- Understanding Memory Controller RPQ/WPQ ordering guarantees for loads and ntstores
- How can the Intel 8086 access the entirety of the address space at a given time when using memory segmentation?
- Can 2 instructions be truly simultaneous on a multi-core CPU
- Using System.getProperty("os.arch") to check if it is armeabi cpu
- Can the status register influence data storage in a CPU?
- Difference between AVR's "ADC r18, r18" and "ROL r18"
- Does legacy x86 (before Intel-VT and AMD-SVM) supports Type 1 Hypervisor?
- What is the difference between Trap and Interrupt?
- Do CPUs have a hardware "math cache" or dictionary that stores the result of simple math operations for quicker processing?
- Aligning to cache line and knowing the cache line size
- Are page table locations specified/constrained in x86 operating systems?
- Why not just predict both branches?