sipvoiptls1.2dtls

SIP over TLS bandwidth consumption


let's say I have connection using SIPS (SIP secure) using g729 codec. Does anyone know how many bandwidth it takes?

I know call using g729 codec 10ms is about 11Kb bandwidth consumption.


Solution

  • According to me:

    Imagine you have a one minute call. The total exchange would be, for example:

    For SIP:

    1000 bytes for INVITE
    1000 bytes for 200 OK for INVITE
    500 bytes for ACK
    500 bytes for BYE
    500 bytes for 200 Ok for BYE
    total = 3500 bytes
    

    For RTP and g729, with 10ms:

    Each of my RTP packet is 22 bytes. (not including UDP headers)
    G729 payload: 10 bytes
    RTP header: 12 bytes
    total = 100 * 22 = 2200 bytes/second (which is 17,6kb/s)
    total = 100 * 22 * 60 = 132000 bytes for a one minute call
    

    For only one minute, the ratio is already

    132000/(132000+3500) = 97,4%
    3500/(132000+3500) = 2,6%
    

    If you have longuer call duration, the sip related bandiwdth would drop quickly under 1%.

    If you have frequent SIP messages during the calls (like INFO), may be you can take them into account, but this is usually not the case.

    NOTE: I used an 8kbit/s G729 stream encoder instead of 11kbit/s. Just replace with your own values.

    EDIT: With usual SRTP encryption method, if you use SRTP, the encrypted payload will remain the same size. However, an additionnal authentication tag is usually used. With AES_CM_128_HMAC_SHA1_80 being used, 10 bytes will be added to each packet.