SIM800L GSM Module working with http and shows error with https, why?

I'm trying to send some sensor data to MySQL database using Arduino and sim800l GSM module. And it's working perfectly when I use HTTP for the URL and remove the SSL certificate from my website. But when I have enabled the SSL certificate on my website it shows HTTP response code 606 in the serial monitor. Here is my working code without SSL certificate(this code works perfectly)

#include <SoftwareSerial.h>
SoftwareSerial gprsSerial(3, 2);

void setup()
{
  gprsSerial.begin(19200);
  Serial.begin(19200);

  Serial.println("Config SIM900...");
  delay(2000);
  Serial.println("Done!...");
  gprsSerial.flush();
  Serial.flush();

  // attach or detach from GPRS service 
  gprsSerial.println("AT+CGATT?");
  delay(100);
  toSerial();


  // bearer settings
  gprsSerial.println("AT+SAPBR=3,1,\"CONTYPE\",\"GPRS\"");
  delay(2000);
  toSerial();

  // bearer settings
  gprsSerial.println("AT+SAPBR=3,1,\"APN\",\"myapn\"");
  delay(2000);
  toSerial();

  // bearer settings
   gprsSerial.println("AT+SAPBR=0,1");
   delay(2000);
  gprsSerial.println("AT+SAPBR=1,1");
  delay(2000);
  toSerial();
}


void loop()
{
   // initialize http service
   gprsSerial.println("AT+HTTPINIT");
   delay(2000); 
   toSerial();

   // set http param value
   gprsSerial.println("AT+HTTPPARA=\"URL\",\"http://www.website123456.com/data/index.php?data1=2.88&data2=2.93\""); 
   delay(20000);
   toSerial();

   // set http action type 0 = GET, 1 = POST, 2 = HEAD
   gprsSerial.println("AT+HTTPACTION=0");
   delay(6000);
   toSerial();

   // read server response
   gprsSerial.println("AT+HTTPREAD"); 
   delay(10000);
   toSerial();

   gprsSerial.println("");
   gprsSerial.println("AT+HTTPTERM");
   toSerial();
   delay(300);

   gprsSerial.println("");
   delay(10000);
}

void toSerial()
{
  while(gprsSerial.available()!=0)
  {
    Serial.write(gprsSerial.read());
  }
}

Here is the output when I replace the URL with https and enable my website ssl. (as you can see it shows http response code 606 "Not Acceptable The user's agent was contacted successfully but some aspects of the session description such as the requested media, bandwidth, or addressing style were not acceptable"

23:16:48.974 -> Config SIM800L...
23:16:50.946 -> Done!...
23:16:51.079 -> AT+CGATT?

23:16:51.079 -> +CGATT: 1
23:16:51.079 -> 
23:16:51.079 -> OK
23:16:53.107 -> AT+SAPBR=3,1,"CONTYPE","GPRS"

23:16:53.107 -> OK
23:16:55.100 -> AT+SAPBR=3,1,"APN","dialogbb"

23:16:55.133 -> OK
23:16:59.122 -> AT+SAPBR=0,1

23:16:59.155 -> OK
23:16:59.155 -> AT+SAPBR=1,1

23:17:01.151 -> OK
23:17:03.185 -> AT+HTTPPARA="URL","https://www.mywebsitttte.com/index.php?dAT+HTTPSSL=1

23:17:08.207 -> OK
23:17:14.221 -> AT+HTTPACTION=0

23:17:14.255 -> OK
23:17:14.255 -> 
23:17:14.255 -> +HTTPACTION: 0,606,0
23:17:24.266 -> AT+HTTPREAD

23:17:24.266 -> OK
23:17:36.595 -> 
AT+HTTPTERM

23:17:36.595 -> OK

So what are the modifications I should do to this code, to be able to upload data to the website with SSL certificate? I have seen people say I need to enter to SSL mode using this code AT+HTTPSSL=1 where should I put this code. Thanks

I have figured out it finally, It happens because this sim800 only supports TLS 1.0. But it's a deprecated version and many websites and host services have disabled it. You can check your server SSL version from here cdn77.com/tls-test