NVME sensor reading error with more than 1 NVME configured in entity manager

• Hi, I'm trying to read NVMe sensors using NVMeSensor from dbus-sensors. I have configured for 4 Nvmes in my *.json file of entity-manager (EM) config and it logged "Sensor x error reading" for all. I put the config in the common EM config for the board together with Fan sensors, ADCsensors and others, refering this (https://github.com/ibm-openbmc/entity-manager/blob/14a7bc9303d747dbc20cb702083e7af0a3cf0496/configurations/NVME%20P4000.json#L10-L41). In this case, I see that boost::asio::async_read at https://github.com/openbmc/dbus-sensors/blob/ce6bcdfc28f60173093087050a43adbc586fd6fa/src/NVMeBasicContext.cpp#L290 returns the response of size 0. But the resp from https://github.com/openbmc/dbus-sensors/blob/ce6bcdfc28f60173093087050a43adbc586fd6fa/src/NVMeBasicContext.cpp#L83 has size of 6 and valid value.
• Howerver, when I config only 1 nvme in EM, it returns value normally on dbus.
• I wonder if NVMeSensor only support nvme with a fru and we have to have a single json file for each just like NVMEP4000.json. What should I do when I want to config all the nvme inside the EM config of the board?. Since I can't find any reference.

2. I have not found the meaning of "Address" in NVME1000 config since it will use 0x6a anyway, at least to what I have seen. Can you tell me what is it for?
3. I'm really new to OpenBMC and don't get much of the mechanism of the code, please help to remedy my understanding if it's not correct. Any advice from you will be appreciated a lot. Thank you.

Edited

I realize that when 1 of the NVME is not present, all of them will fails. I think the failed one affects the stream for reading or the response stream (respStream) although each nvme has a separate request stream (reqStream). I don't know why they interfere each other, but I see that when the resp size from smbus is < 0, they still write them to the stream without resizing the resp vector like when the size is normal, I add the resp.resize(len) here (https://github.com/openbmc/dbus-sensors/blob/ce6bcdfc28f60173093087050a43adbc586fd6fa/src/NVMeBasicContext.cpp#L153), it works, and we can do hot plug. Is that because I did not use FRU probe for the NVMEs....?

• Putting all nvme configs inside the baseboard EM config is OK. There are hotplug issues with dbus-sensors nvmesensor, so when one of my configured nvme is not present, all the others will fail. I only plugged 1 nvme to one of the 4 slots so it causes the problem. I was told they are checking on this, but I'm doing the trick I put in the Edit section of my question.
• They hardcode 0x6A for i2c address in nvmesensor code, the reason is as @KagurazakaKotori said.