I am trying to convert int16_t to float
code is
int16_t ADC_value;
float voltage = (float)ADC_value/1000.0f;
printf("%f\r\n",voltage);
result
when the voltage exceeds 2.0V floating point values become (-)values. but before it converts to floating point values it is normal.
code:-
int16_t ADC_value;
printf("%u\r\n",ADC_Value); //this is correct
is that int16_t to float conversion wrong?
For ADCs, I find this to be the prevailing pattern. Since you are using LTC1867, you need to determine whether the IC is operated in bipolar or uni-polar mode. The FSR is 4.096. If unipolar, you should use a uint16_t as the ADC value. If bipolar mode, you should use int16_t. In bipolar mode, the ADC is a signed twos complement, which can vary from +/- 32767, so you would need to alter the FSR variable I use below.
const float fsr = 4.096; // Full-scale range, Volts, depends on the ADC
const float max_val = 65535.0f; // For 16-bit unsigned ADC, 2^16 -1
float voltage = fsr*((float)ADC_value / max_val);