I am using mellanox Connectx6, dpdk 22
'MT2892 Family [ConnectX-6 Dx] 101d' if=ens5f1 drv=mlx5_core unused=igb_uio
I configure port with multiqueue and split traffic according to ip+port
I want to calculate the hash as the nic do, to be able to load balance traffic ( from another card ) - the information is inside the packet and not in in ip and transport layer. For this purpose i need to be able to calculate the hash value as the nic do for the first nic.
Here is the code i use to split traffic to rx queues
/*rte flow*/
const int MAX_PATTERN_IN_FLOW = 10;
const int MAX_ACTIONS_IN_FLOW = 10;
struct rte_flow_attr attr;
struct rte_flow_item pattern[MAX_PATTERN_IN_FLOW];
struct rte_flow_action actions[MAX_ACTIONS_IN_FLOW];
struct rte_flow *flow;
struct rte_flow_error error;
memset(pattern, 0, sizeof(pattern));
memset(actions, 0, sizeof(actions));
/* Set the rule attribute, only ingress packets will be checked. 8< */
memset(&attr, 0, sizeof(struct rte_flow_attr));
attr.ingress = 1;
pattern[0].type = RTE_FLOW_ITEM_TYPE_ETH;
pattern[0].spec = NULL;
pattern[1].type = RTE_FLOW_ITEM_TYPE_IPV4;
pattern[1].spec = NULL;
pattern[2].type = RTE_FLOW_ITEM_TYPE_GRE;
pattern[2].spec = NULL;
pattern[3].type = RTE_FLOW_ITEM_TYPE_ETH;
pattern[3].spec = NULL;
pattern[4].type = RTE_FLOW_ITEM_TYPE_IPV4;
pattern[4].spec = NULL;
pattern[5].type = RTE_FLOW_ITEM_TYPE_UDP;
pattern[5].spec = NULL;
// end the pattern array
pattern[6].type = RTE_FLOW_ITEM_TYPE_END;
struct rte_flow_action_rss rss_conf;
uint16_t queues[pi_nNumRxQueues];
rss_conf.func = RTE_ETH_HASH_FUNCTION_DEFAULT;
uint64_t hf = RTE_ETH_RSS_IP | RTE_ETH_RSS_TCP | RTE_ETH_RSS_UDP | RTE_ETH_RSS_SCTP;
hf &= pi_devInfo.flow_type_rss_offloads;
rss_conf.types = hf;
rss_conf.queue_num = pi_nNumRxQueues;
for (int nqQueueIndex= 0; nqQueueIndex < pi_nNumRxQueues; nqQueueIndex++)
queues[nqQueueIndex] = nqQueueIndex;
rss_conf.queue = queues;
rss_conf.key_len = 0;
rss_conf.key = NULL;
rss_conf.level = 2;
// create the drop action
actions[0].type = RTE_FLOW_ACTION_TYPE_RSS;
actions[0].conf = &rss_conf;
actions[1].type = RTE_FLOW_ACTION_TYPE_END;
// validate and create the flow rule
if (rte_flow_validate(pi_nPort, &attr, pattern, actions, &error)==0)
{
flow = rte_flow_create(pi_nPort, &attr, pattern, actions, &error);
if(flow){//success}
else{//error}
}
else {error}
}
And this is how i tried to get the hash value saved in the mbuf, but failed
uint8_t rss_hash_default_key[] = {
0x2c, 0xc6, 0x81, 0xd1,
0x5b, 0xdb, 0xf4, 0xf7,
0xfc, 0xa2, 0x83, 0x19,
0xdb, 0x1a, 0x3e, 0x94,
0x6b, 0x9e, 0x38, 0xd9,
0x2c, 0x9c, 0x03, 0xd1,
0xad, 0x99, 0x44, 0xa7,
0xd9, 0x56, 0x3d, 0x59,
0x06, 0x3c, 0x25, 0xf3,
0xfc, 0x1f, 0xdc, 0x2a,
};
static inline uint32_t
do_softrss(struct rte_mbuf *m)
{
uint32_t input_len;
struct rte_ipv4_tuple ipv4_tuple;
char * pRawPacket = static_cast<char*>(rte_pktmbuf_mtod(pi_mbuf, void* ));
IpHeader * pIpHeader = (IpHeader *)(pRawPacket + offsetOfIp);
if(pIpHeader->GetVersion()==4)
{
ipv4_tuple.src_addr = rte_be_to_cpu_32(pIpHeader->dwSrcAddressBigEndian);
ipv4_tuple.dst_addr = rte_be_to_cpu_32(pIpHeader->dwDstAddressBigEndian);
ipv4_tuple.sport = *(uint16_t*)(pRawPacket + transportLayerOffset);
ipv4_tuple.dport = *(uint16_t*)(pRawPacket + transportLayerOffset+2);
input_len = RTE_THASH_V4_L3_LEN;
return rte_softrss_be((uint32_t *)&ipv4_tuple, input_len, rss_key_be);
}
return 0;
}
new_rss = do_softrss(mbuf_pointer);
std::cout<< std::hex << mbuf_pointer->hash.rss << " -> " << new_rss << std::dec << std::endl;
And i get a different value than the mbuf_pointer->hash.rss
5ed28a5c -> 33eb33eb
974c1896 -> 24e224e2
1edf1638 -> 21752175
8a54c19 -> 80638063
459a6f76 -> 1b351b35
1cdf1d1c -> e53be53b
I understand it is possible to do it, but i don't get the same value
ethtool -i ens5f0
driver: mlx5_core
version: 5.8-3.0.7
firmware-version: 22.32.2004 (MT_0000000437)
expansion-rom-version:
bus-info: 0000:83:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: no
supports-register-dump: no
supports-priv-flags: yes
There might be two main reasons why the mismatch is observed:
rte_softrss_be
RTE_THASH_V4_L3_LEN
instead of RTE_THASH_V4_L4_LEN
Given the OP code snippet, consider to fix this as follows:
ipv4_tuple.src_addr = rte_be_to_cpu_32(pIpHeader->dwSrcAddressBigEndian);
ipv4_tuple.dst_addr = rte_be_to_cpu_32(pIpHeader->dwDstAddressBigEndian);
ipv4_tuple.sport = rte_be_to_cpu_16(*(uint16_t*)(pRawPacket + transportLayerOffset));
ipv4_tuple.dport = rte_be_to_cpu_16(*(uint16_t*)(pRawPacket + transportLayerOffset+2));
input_len = RTE_THASH_V4_L4_LEN;
As for the key, please make sure that
rss_hash_default_key
from the OP snippet) is passed to flow action RSS:rss_conf.key_len = RTE_DIM(rss_hash_default_key);
rss_conf.key = rss_hash_default_key;
rss_key_be
passed to rte_softrss_be
is derived from rss_hash_default_key
as follows:uint8_t rss_key_be[40];
rte_convert_rss_key((uint32_t *)rss_hash_default_key,
(uint32_t *)rss_key_be,
RTE_DIM(rss_key_be));