Winsocket UDP : works only when wireshark launched

I have FPGA device which is waiting for UDP packet "FFFF" on port 1000, then answers also with UDP "FFFF". This code works fine, I see incoming "FFFF" packets on my JTAG, but only when Wireshark is launched. If Wireshark is off all I see on JTAG is arp packets, to which I respond, and then - nothing. My C project is on Codeblocks, i had writed "-lwsock32" on other linker options of linker settings.

What am I doing wrong, I want my code work without Wireshark...I guess Wirshark launches some server and everything starts working

MAC of my device is 34:34:45:79:34:54, IP is 192.168.150.111 (can be found in code) IP of my PC is in same network - 192.168.150.5

#include <stdio.h>
#include <stdbool.h>
#include <windows.h>
#include <conio.h>


int main(int argc, char* argv[])
{
    


SOCKET sckt;
struct sockaddr_in sckt_addr;
DWORD timeout;



    WSADATA WSAData;
    int rc = WSAStartup (0x202, &WSAData);
    if(rc != 0)
    {
        printf("Ошибка инициализация версии Windows Sockets");
        return -1;
    }

    sckt = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP);
    if(sckt == INVALID_SOCKET)
    {
        printf("Ошибка инициализация версии Windows Sockets");
        return -1;
    }

    sckt_addr.sin_family = AF_INET;
    sckt_addr.sin_addr.s_addr = INADDR_ANY;
    sckt_addr.sin_port = htons(1000);

    if(bind (sckt , (LPSOCKADDR) &sckt_addr, sizeof(sckt_addr)) == SOCKET_ERROR)
    {
        printf("Error while initializing Windows Sockets");
        closesocket (sckt);
        return -1;
    }

    sckt_addr.sin_addr.s_addr = inet_addr("192.168.150.111");


    char o_data[2];
    o_data[0] = o_data[1] = 0xFF;
    const int i_data_len =    7;
    char i_data [7];
    int sckt_addr_size = 32;


    while(true)
    {
        rc = sendto (sckt, o_data, 2, 0, (SOCKADDR *)&sckt_addr, sizeof(sckt_addr));        
                                                                                                                                                                    
        if (rc != 2)
        {
            printf ("Socket error");
            return 1;
        }

        rc = recvfrom (sckt, i_data, i_data_len, 0, (SOCKADDR *) &sckt_addr, &sckt_addr_size);
        if (WSAGetLastError() == WSAETIMEDOUT)                                                          
        {
            printf ("No response from FPGA");
            continue;
        }
        else
        {
            if (((unsigned char)i_data[0] << 8) + (unsigned char)i_data[1] == 0xFFFF)
                printf("\n\nDevice answered FFFF\n");
            else
            {
                printf("\n\nReceived wrong response. ");
                return 2;
            }
        }
    }



    closesocket (sckt);
    WSACleanup ();

    return 0;
}

The moment I run wireshark I see that my FPGA answers with ARP-packet and UDP packets going fine:

Finally I got it!
My ARP responce was too short - 42 bytes (ARP-request from C++ on wireshark shown as only 42 bytes). I had to add 18 zeroes to my ARP responce to make it 64 bytes (min length).
Apparently from C++ to network card something is extending ARP-request, but this happens after Wireshark, and it doesn't show correct length of 64 bytes
Probably my UDP packets too short too.
But running Wireshark ignores these errors and everything works. It doesnt even mark it as problem!