c++arduinoavr-gccwinavr

C++; eclipse linker error


So working on getting my eclipse IDE going so I can develop my arduino uno in eclipse. My C++ is weak so this is probably a nube error on my part.

I have a blink program that looks for an arduino library I compiled from the arduino IDE's library. My code points to the header file and my code find it fine; meaning I can click on:

#include <arduino.h>

and go view the header

this: "C:/programs/arduino-1.0/hardware/arduino/cores/328p_lib/libuno_library.a" is a valid path... but I get the following error:

>****** Build of configuration Debug for project project1 ****
>make all 
>Building target: project1.elf
>Invoking: AVR C++ Linker
>avr-g++ -Wl,-Map,project1.map,--cref -L"C:\programs\arduino->1.0\hardware\arduino\cores\328p_lib" -mmcu=atmega328p -o "project1.elf"  ./code/code1.o   >-l"C:/programs/arduino-1.0/hardware/arduino/cores/328p_lib/libuno_library.a"
>c:/programs/winavr/bin/../lib/gcc/avr/4.3.3/../../../../avr/bin/ld.exe: cannot find ->lC:/programs/arduino-1.0/hardware/arduino/cores/328p_lib/libuno_library.a
>make: *** [project1.elf] Error 1
>**** Build Finished ******

Solution

  • Well after wasting 2 days or so of fun time I finally found the problem.

    http://sourceforge.net/projects/avr-eclipse/forums/forum/664382/topic/4640554

    When adding the static library to the linker you have to remove the lib prefix and the .a suffix. not sure what that is about.