I have a problem in my book about calculating the utilisation, but I'm not being able to find any substantial information regarding this topic in order to solve it.
Anyway, here's the question:
The distance from earth to a distant planet is approximately 9 × 10^10 m. What is the channel utilization if a stop-and-wait protocol is used for frame transmission on a 64 Mbps point-to-point link? Assume that the frame size is 32 KB and the speed of light is 3 × 10^8 m/s.
Suppose a sliding window protocol is used instead. For what send window size will the link utilization be 100%? You may ignore the protocol processing times at the sender and the receiver.
This is a fairly simple question. Utilization is the part of time that the medium is being used with "good" byte, that is bytes of payload (no headers or ack/nack frames).
In your question, there is no header specified and ACK size is not given, thus I will assume they are both of size 0.
Each period is Tx + propagation + ACK propagation = Tx + RTT
Tx = 32KB/64Mbps = 0.004 seconds (assuming base 10 for kilo and mega)
RTT = 2 * (9*10^10m) / (3*10^8m/s) = 600 seconds
Utilization = 0.004 / (600 + 0.004) = 6.667x10^-6 = 6.667x10^-4 %
This is very bad utilization, since the medium is very long and there is a lot of time wasted for waiting for the ACK.
Since there is no error probability, I assume it is 0. To get to 100% utilization, you need to keep transmitting packets while you wait for the ACKs, that means for the whole period.
period = 600.004 seconds
1 Tx = 0.004 seconds
For non stop Tx you need to transmit 600.004/0.004 packets each period, therefore 150001 should be your window size.