I am new to Linux kernel module. I am learning char driver module based on a web course. I have a very simple module that creates a /dev/chardevexample, and I have a question for my understanding:
When I do echo "hello4" > /dev/chardevexample, I see the write execute exactly once as expected. However, when I do cat /dev/chardevexample, I see the read executed two times.
I see this both in my code and in the course material. All the data was returned in the first read(), so why does cat call it again?
All the things I did so far are as follows:
insmod chardev.ko to load my moduleecho "hello4" > /dev/chardevexample. This is the write and I see it happening exactly once in dmesg cat /dev/chardevexample. This is the read, and dmesg shows it happening twice. I did strace cat /dev/chardevexample, and I indeed see the function call being called twice for read. There is a write in between as well
read(3, "hello4\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 131072) = 4096
write(1, "hello4\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096hello4) = 4096
read(3, "", 131072)
dmesg after read (cat command)
[909836.517402] DEBUG-device_read: To User hello4 and bytes_to_do 4096 ppos 0 # Read #1
[909836.517428] DEBUG-device_read: Data send to app hello4, nbytes=4096 # Read #1
[909836.519086] DEBUG-device_read: To User and bytes_to_do 0 ppos 4096 # Read #2
[909836.519093] DEBUG-device_read: Data send to app hello4, nbytes=0 # Read #2
Code snippet for read, write and file_operations is attached. Any guidance would help. I searched extensively and couldn't understand. Hence the post.
/*!
* @brief Write to device from userspace to kernel space
* @returns Number of bytes written
*/
static ssize_t device_write(struct file *file, //!< File pointer
const char *buf,//!< from for copy_from_user. Takes 'buf' from user space and writes to
//!< kernel space in 'buffer'. Happens on fwrite or write
size_t lbuf, //!< length of buffer
loff_t *ppos) //!< position to write to
{
int nbytes = lbuf - copy_from_user(
buffer + *ppos, /* to */
buf, /* from */
lbuf); /* how many bytes */
*ppos += nbytes;
buffer[strcspn(buffer, "\n")] = 0; // Remove End of line character
pr_info("Recieved data \"%s\" from apps, nbytes=%d\n", buffer, nbytes);
return nbytes;
}
/*!
* @brief Read from device - from kernel space to user space
* @returns Number of bytes read
*/
static ssize_t device_read(struct file *file,//!< File pointer
char *buf, //!< for copy_to_user. buf is 'to' from buffer
size_t lbuf, //!< Length of buffer
loff_t *ppos)//!< Position {
int nbytes;
int maxbytes;
int bytes_to_do;
maxbytes = PAGE_SIZE - *ppos;
if(maxbytes >lbuf)
bytes_to_do = lbuf;
else
bytes_to_do = maxbytes;
buffer[strcspn(buffer, "\n")] = 0; // Remove End of line character
printk("DEBUG-device_read: To User %s and bytes_to_do %d ppos %lld\n", buffer + *ppos, bytes_to_do, *ppos);
nbytes = bytes_to_do - copy_to_user(
buf, /* to */
buffer + *ppos, /* from */
bytes_to_do); /* how many bytes*/
*ppos += nbytes;
pr_info("DEBUG-device_read: Data send to app %s, nbytes=%d\n", buffer, nbytes);
return nbytes;} /* Every Device is like a file - this is device file operation */ static struct file_operations device_fops = {
.owner = THIS_MODULE,
.write = device_write,
.open = device_open,
.read = device_read,};
The Unix convention for indicating end-of-file is to have read return 0 bytes.
In this case, cat asks for 131072 bytes and only receives 4096. This is normal and not to be interpreted as having reached the end of the file. For example, it happens when you read from the keyboard but the user only inputs a small amount of data.
Because cat has not yet seen EOF (i.e. read did not return 0), it continues to issue read calls until it does. This means that if there's any data, you will always see a minimum of two read calls: one (or more) for the data, and one final one that returns 0.