I'm using a Synopsys OTG core in device mode. Programming an isochronous IN high speed endpoint (USB 2.0) for the maximum transfer per microframe (3 packets of 1024 bytes) using a periodic FIFO dedicated to this endpoint. It works 99+% of the time. But occasionally the transfer is truncated. For example, the first 1024 bytes will go onto the bus with the DATA0 PID (instead of the correct DATA2 PID) and the remaining 2048 bytes will not be sent. Since I've programmed the packet count, multicount, max packet size and transfer size correctly I'm not sure what is causing this.
Obviously this is a very specific question and I don't have much hope of getting an answer, but I figured a shot in the dark was worth a try. Thanks in advance.
Answering my own question in case it may help someone else. It appears this OTG controller has a bug where the TX FIFO does not always empty properly. I found a successful workaround is to flush the FIFO after each TX. It's quick and the truncation symptom goes away.