CodevisionAVR SHT11 Read just Temperature or Humidity

I tried to personalize shtxx library but there is a problem with this code.

When I run it lcd stuck on "Hello" but if I comment readHumi or readTemp in while, program runs with no problem.

Just when both is not commented program gets stuck on second one and it does not matter which one is first.

I have tested delay between them, try to read in one void and every thing i think should solve but not solved

#include <mega16.h>
#include <delay.h>
#include <stdio.h>
#include <alcd.h>

int temp,humi;
char buffer[16];

#define SCK PORTB.0
#define DATA PINB.1
#define DATAO PORTB.1
#define DATAD DDRB.1

void shtStart(void){
    DATAD = 1; //set B1 Output
    DATAO = 1; //set B1 High
    SCK = 0;   //set B0 Low
    SCK = 1;   //set B0 High
    DATAO = 0; //set B1 Low
    SCK = 0;   //set B0 Low
    SCK = 1;   //set B0 High
    DATAO = 1; //set B1 High
    SCK = 0;   //set B0 Low
    
}

char shtWrite(unsigned char Byte){
    unsigned char in, err = 0;
    DATAD = 1; //set B1 Output
    delay_us(5);
    for(in = 0b10000000; in > 0; in /= 2){
        SCK = 0;
        if(in & Byte) DATAO = 1; //send 1s
        else          DATAO = 0; //send 0s
        SCK = 1;
    }
    SCK = 0;
    DATAD = 0; //set B1 Input
    SCK = 1;
    err = DATA;
    SCK = 0;
    return(err);
}
unsigned char shtRead(unsigned char ack){
    unsigned char in, val = 0;
    DATAD = 0; //set B1 Input
    delay_us(5);
    for(in = 0b10000000; in > 0; in /= 2){
        SCK = 1;
        if (DATA) val = val | in; //save 1s
        SCK = 0;
    }
    DATAD = 1; //set B1 Output
    DATAO = !ack;
    SCK = 1;
    SCK = 0;
    return(val);    
}

int readTemp(){
    long int ttmp;
    unsigned char tlsb, tmsb;
    shtStart();
    shtWrite(0b00000011);
    while(DATA);
    tmsb = shtRead(1);
    tlsb = shtRead(1);
    ttmp = (((unsigned long) tmsb << 8) | (unsigned long) tlsb);
    return (-40 + 0.01 * ttmp) * 10;
}

int readHumi(){
    long int htmp;
    unsigned char hlsb, hmsb;
    shtStart();
    shtWrite(0b00000101);
    while(DATA);
    hmsb = shtRead(1);
    hlsb = shtRead(1);
    htmp = (((unsigned long) hmsb << 8) | (unsigned long) hlsb);
    return (-4 + (0.0405 * htmp) + (-2.8E-6 * (htmp * htmp))) * 10;
}

void main(void)
{
DDRA=(1<<DDA7) | (1<<DDA6) | (1<<DDA5) | (1<<DDA4) | (1<<DDA3) | (1<<DDA2) | (1<<DDA1) | (1<<DDA0);
PORTA=(0<<PORTA7) | (0<<PORTA6) | (0<<PORTA5) | (0<<PORTA4) | (0<<PORTA3) | (0<<PORTA2) | (0<<PORTA1) | (0<<PORTA0);
DDRB=(0<<DDB7) | (0<<DDB6) | (0<<DDB5) | (0<<DDB4) | (0<<DDB3) | (0<<DDB2) | (0<<DDB1) | (1<<DDB0);
PORTB=(0<<PORTB7) | (0<<PORTB6) | (0<<PORTB5) | (0<<PORTB4) | (0<<PORTB3) | (0<<PORTB2) | (1<<PORTB1) | (0<<PORTB0);

lcd_init(16);
lcd_puts("Hello");

while (1)
      {
      humi = readHumi();
      temp = readTemp();
      lcd_clear();
      sprintf(buffer, "T= %d.%d" "\xdf" "C, ", temp / 10, temp % 10);
      lcd_puts(buffer);
      sprintf(buffer, "H= %d.%d", humi / 10, humi % 10);
      lcd_puts(buffer);
      delay_ms(500);
      }
}

It solved with adding a sensor reset at the end of readHumi and readTemp functions:

shtStart();
shtWrite(0x1e);