ST-LINK could not connect to the target
I'm trying to connect to stm32f401rbt6 with st-link utility.
The MCU has 6 pins connected, as on the image below.
The target is powered by a lab power supply, target GND is connected to the ST-Link GND
When I plug it to the computer, st-link utility says it can't connect.
Tried:
- Update ST-Link firmware
- Connect under reset is by default, tried all available methods
- Checked connectivity for the pins on the image
- Connected with the same ST-Link to other MCU
- Desoldered the MCU and soldered another one
The issue is still remain. Please suggest what I'm doing wrong, or how to check that my MCU is alive.
Solution
I once had similiar issues and i figuered out, that decoupling capacitors were vital. After soldering this onto the pcb, it worked like a charm.
- ST-LINK could not connect to the target
- Is a bootloader required to run firmware?
- How to acess COM port of remote system?
- Outputting a Triangular Waveform from a DAC Output Pin at a rate of 77khz on an stm board
- How to optimize GPIO writes for performance, power efficiency, and reliability?
- static variable in (embedded) C, instancing of header-file and memory consumption?
- no global memory allocator found but one is required; link to std or add `#[global_allocator]` to a static item that implements the GlobalAlloc trait
- Intel C++ Compiler for Windows CE
- How to understand the operand encoding of Renesas M16C bit instructions?
- Cycle counter on ARM Cortex M4 (or M3)?
- Undefined instruction MRS on bare metal
- PIC16 C compiler
- Rust embedded application is not linked correctly under AArch64 system
- Printf stops working (sends garbage data) when transitioning from C to C++ for STM32l433 board
- Serving static html files using DefaultServlet on embedded Jetty
- Are ARM instructuons SWI and SVC exactly same thing?
- How to run my code on an ARM _without_ debugging?
- what's the reason for that noise and why do my exact values produce no noise?
- Google Test for embedded systems
- Compiling an application for use in highly radioactive environments
- Can't set frequency more than 48MHz on STM32F767ZI
- Stack is not aligned to 8 bytes on exception entry
- Converting accelerometer value to m/s^2
- How to change SCB->VTOR in app (stm32f4 HAL)?
- ccs compiler multiple compilation units feature
- Are mutable static primitives actually `unsafe` if single-threaded?
- STM32 FDCAN filters not filtering anything
- Eclipse: Cannot run program "cs-make": Launching failed
- A Scheme compiler for ARM processors
- How to prevent reordering of calls to a function that prints log messages in C?